Product ID:ACRYLIC ENAMEL REDUCER, DTR601
MSDS Date:11/10/1987
FSC:8010
NIIN:01-046-2975
MSDS Number: BTGGH

PPG INDUSTRIES, INC

260 KAPPA DRIVE
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: DO894

PPG INDUSTRIES, INC.

9 ALLISON PARK, PA 15101 US

Telephone: 412-592-5555

Cage: DO894

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 20%

OSHA PEL 1000.00 PPM

ACGIH TLV: 750.00 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTOXY ETHYL ACETATE

CAS: 112-07-2

RTECS: KJ8925000

Fraction By Weight: 10%

LIGHT ALIPHATIC SOLVENT NAPHTHA

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 45%

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25%

OSHA PEL 200.00 PPM

ACGIH TLV: 100.00 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INGEST: HARMFUL/FATAL. EYE:
IRRITATION. SKIN: MODERATE IRRITATION. MAY BE ABSORBD THROUGH SKIN.
INHAL: VAPOR & SPRAY MIST MAY BE HARMFUL. VAPOR IRRITATES EYES,
NOSE, & THROAT. REPEATED EXPOSURE (HIGH CONCENTRATION): RESP
IRRIT, PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. CONCENTRATING &
INHALING MAY BE HARMFUL OR FATAL.
Effects of Overexposure:EYE WATERING, HEADACHE, NAUSEA, DIZZINESS, &
LOSS OF COORDINATION INDICATES THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTA CT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, & SWELLING ARE CONDITIONS ASSOCIATED WITH
EXCESSIVE SKIN CONTACT.

First Aid:INGEST: DON'T INDUCE VOMITING. EYE: FLUSH EYES IMMED W/WATER
15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER THEN WASHING W/SOAP &
WATER. INHAL: REMOVE TO FRESH AIR. APPLY ARTIF RESPIRATION & OTHER
SUPPOR TIVE MEASURES AS REQ'D. OTHER: IF ANY OF FOLLOWING OCCURS,
CONTACT POISON CONTROL CENTER, EMERG ROOM OR DR IMMED. HAVE MSDS
AVAILABLE. INGEST, EXPOSURE, PERSIST SKIN/EYE IRRIT/BREATHING
DIFFICULTIES.

Flash Point Method:PMCC
Flash Point:12F,-11C
Lower Limits:1.5
Extinguishing Media:NFPA CLASS B EXTINGUISHER (CO2, DRY CHEMICAL, OR
UNIVERSAL AQUEOUS FILM FORMING FOAM) FOR NFPA CLASS 1B FLAMM LIQ
FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, USE TO COOL
(FOG NOZZLES PREFERRED) CLOSED CONTAINERS TO PREVENT PRESSURE BLDUP
& POSSIBLE AUTOIGNIT OR EXPLOSION. WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CONTAINER CLOSED.KEEP FROM
HEAT/ELECTRICAL EQUIP.CLOSED CONTAINER MAY EXPLODE W/HEAT.DON'T
APPLY ON HOT SURFACES.TOXIC GASES MAY FORM IF CONTACT W/FLAME.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESPIRATORY & SKIN & EYE PROTECTION SHOULD BE PERMITTED IN
AREA. REMOVE IGNITION SOURCE. TAKE UP SPILL W/SAWDUST, VERMICULITE,
OR OTHER ABSORBENT & P LACE INTO CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LRG QTY
IN BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS 1B
FLAMMABLE LIQUIDS.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS FOR OTHER COMPONENTS BEFORE BLENDING AS RESULTING
MIXTURE MAY HAVE HAZARDS OF ALL PARTS. CONTAINERS SHOULD BE
GROUNDED WHEN POURING. AVOID FREE FALL OF LIQ >FEW INCHES.

Respiratory Protection:OVEREXPOSURE TO VAPOR MAY BE PREVENTED BY
ENSURING VENT CONTROLS,VAPOR EXHAUST OR FRESH AIR ENTRY. NIOSH/MSHA
(TC 23C) PAINT SPRAY OR AIR SUPPLIED (TC-19C) RESPIRATORS MAY ALSO
REDUCE EXPOSURE. READ R ESP MFR INSTRUCTIONS FOR TYPE OF RSPRTR.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST VENT TO KEEP
CONCENTRATION OF INGREDIENTS BELOW LOWEST TLV/PEL & LEL.
Protective Gloves:NITRILE, NEOPRENE, OR POLYVINYL ALCOHOL
Eye Protection:CHEM TYPE SPLASH GOGGLES/FULL FACE SHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING,INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NITRILE RUBBER,NEOPRENE RUBBER OR
POLYVINYL ALCOHOL.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health

Boiling Pt:B.P. Text:56 TO 192C
Vapor Pres:81.8 MM HG
Vapor Density:> AIR
Spec Gravity:0.79
Evaporation Rate & Reference:405 (BUOAC=100)
Solubility in Water:20.2%
Percent Volatiles by Volume:100.0

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED, INCLUDING: CARBON MONOXIDE.

Waste Disposal Methods:WASTE MUST BE DISPOSED OF IN ACCORDANCE WITH
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTIANERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED
WASTE MANAGEMENT FACILI TY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.